- The official global XCPUScalar discussion forum!
- XCPUScalar version history
- What new features would like to see in XCPUScalar
- Toshiba e335
- Notification Error Message
- XCPUScalar for 1910 supports PXA255 processor
- Keylock question
- A bug
- Loosing Compact Flash
- XCPUScalar 400 v2.5 for Windows Mobile 2003 PDA's is now available.
- Dell Axim Locking up at XCPUScalar start
- Install probelm
- XCPUScalar and 193x/194x
- Auto-scale on Axim
- Updates
- Cannot get autoscale on Loox with 2.51
- Task Bar CPU Meter - Colour Tweak?
- Auto Scale Feature
- XCPUScalar tray icon not updated
- Clean out registry
- XCPUScalar on G1000
- XCPUScalar 400 on Axim Basic?
- Problems with 2.53 and a 2215
- Will XCPUScalar run on a 300Mhz Pocket PC
- AutoScale delay?
- Soft reset at 100MHz - what then?
- XCPUScalar 400 v2.53 supports 530MHz.
- Dell Axim processor won't speed up past 400MHz
- AutoScale frezzes my Axim, Why won't it work?
- How do I go about adjusting the speed settings?
- Why won't XCPUScalar work with PXA255 Processor
- Where is there a trial version 2.53
- Hourglass after reseton iPAQ 2215?
- Demo version & XDA 2
- Asus A620 freezes when soft reset
- Install problem
- iPAQ 3975 Performance increase?
- Autoscale ok? Taskbar meter not showing!
- Problem with ipaq 2210 ITA
- Taskbar meter disappears-iPAQ 2215
- problems on an Loox 600
- Asus A620 OC problems
- Screen glitch
- Viewsonic support
- rhinostats
- iPAQ ROM 1.10 & XCPUScalar 2.53
- Asus A716 OC Problems
- 1910 Overclock performance
- Asus A620BT and Overclocking to 530 Mhz
- XCPUScalar 2004 edition is now available for download.
- XCPU 2.6 and my A620
- Upgrade ??
- Sticky Mode option?
- Auto start on soft reset setting does not work
- Hitachi G1000 PPC 2002 PE Locks Up with XCPU 2004 2.62
- XCPUScalar for Acer N10??
- Support for new Axims?
- No AutoScale on Mains Power
- Dell X3 400mhz
- screen toggle doesn't work
- XCPUScalar adds support for Axim X30 and other PXA270 processors
- Symbol PPT-8800
- Manual Scale Values
- X5 locks up @ 472 MHz witth ver 2.80
- Crashes when turned on
- Toshiba e750 success with XCPUScalar?
- axim x30 high freeze problems
- Transparency support now available in XCPUScalar 2004 v2.82
- Problems getting 2.82 via Handango
- No 530 on my ASUS MyPAL
- How to setup an Asus A716?
- Samsung i700 PPC Phone Edition
- iPAQ 5550 freeze
- Something to overclock Ipaq 6315
- XCPU Scalar on Samsung?
- Support for hx4700
- hx4700, XCPUScalar & Bluetooth Manager and Bluetooth Settings
- Error Message if starting Navigon Navigator 4 AND XCPUScalar
- Prob. with Loox 720
- Application Freeze iPAQ hx4700
- 530mhz
- Overclocking Dell axim x5 2003
- Axim X5
- autoscale freezes e800 after some time
- Some Suggestions/Problems.
- Mio 168
- XCPUscalar 2.82 on axim x5 basic(300mhz)
- Bug report MDA III
- XCPUScalar on i-mate PDA2K help please
- XCPUScalar 2004 v2.83 is available for PXA270 and VGA Pocket PC's
- Reproducible problem: hx4700 @ 728 MHz
- Two questions: CPU meter and 728mhz
- XCPUScalar 2.84 is out
- 2.84: first impressions on hx4700
- VGA icons
- XCPUSCALAR v2.85 installed
- Ipaq 6315
- v2.85 won't keep settings after soft reset
- X30 and 728Mhz mode
- samsung.. is it really alive?
- Xcpuscaler work on Toshiba E330?
- MDA Compact - Intel PXA 272 412 MHZ Freeze!
- where can i download version 2.82?
- ipaq filestore install
- Question for anyone with a Dell X3 400Mhz
- Update policy
- Trial version...
- Which version of XCPUScalar for i700 w/ PPC 2003?
- Dead?
- 208mhz is actually slower than 104mhz!?
- Qustion - just out of curiosity...
- xcpuscaler 2.85 impressions on Toshiba e830>> Doesn't work at all.
- Will Xscalar2004 work on samsung processor?
- XCPUSCALAR & Voltage
- X5 Advanced
- Yet another Axim X5 Question
- only 312 mhz while using power supply????
- Exiting XCPUScalar
- Support for Intel PXA272? like O2 XDA II mini?
- Hitachi G1000 Question
- XCPU scalar CPU usage
- XPUScalar on i-mate JAM
- Version 3 Kills Axim X50v's
- Autoscaling on i-mate PDA2k
- Yakumo delta 300 GPS
- HX2415 or HX2755 - Need help in purchasing!
- xcpuscalar on E800
- Flicker on X50?
- Downloading newer versions?
- XCPUScaler on Moto MPx?
- XCPUSCALAR 2.85 on O2 XDAII Mini
- Speed Option on AC Power?
- Support for RX 3115?
- Asus A730W
- Axim X50V and Xcpuscalar
- Where I will Install XCPUScalar ?
- auto scale doesn't work
- XCPUScalar 2004 v2.86 is out
- XCPUScalar 2.86 on XDA II mini
- Qtek 2020i and XCPUscalar 2.86
- Flickering on MITAC MIO 168
- O2 XDA 11s Recommended Settings PLEASE!
- XCPUScalar 2004 v2.87 is now available
- I bought XCPUScalar2004_2-82 - but i dont get a update.
- ver 2.87 freezing up my X50v with A03 ROM
- 2.87 freezes on my HTC Magician when downclocking
- XDA IIi
- O2 XDA 11s
- High Percentage on TaskBar
- Advanced Settings for the O2 XDA 11s PLEASE!
- Does this work on the HP iPaq hw6515 6515 6500? Intel PXA272 at 312 MHz
- fix for the Orange M500 clone of HTC Magician
- XPU scalar on IPAQ 6515 ?
- XPUScalar freeze my VPA
- V 2.87 freeze my Yakumo DeltaX
- 728mhz freezes hx2750
- XCPUScalar 2004 v2.88 is now available
- Real suggestions to next release.
- HTC Magician family, MDA Compact, XDA Mini overclocking to 520MHz
- XCPUScalar on PNA
- (KJAM) omap 850 support?
- Delay on rel 2.88 autoscale function
- Support is poor?
- xcpuscalar + wm2005
- XCPUScalar 2005 now available for download.
- XCPUScalar 2005 with WM5 support now available.
- v2.91 won't reset speed on power toggle
- Landscape display
- OMAP 850
- Please support TI omap850(k-jam).
- XCPUScalar 2005 v2.92 released
- xcpuscalar problems with Ipaq hw6515
- Support on Samsung CPU yet?
- Issue
- XCPUScalar problem, help me !!!
- Where is XCPUScalar v2.93?
- weird issue with xcpuscalar
- XCPUScalar 2.93 is now available for download
- XCPUScalar v2.93 on XDA Exec
- XCPUScalar 2005 Problem
- Xcpuscalar 2.93 and Mitac Mio A201: help please
- XCPUScalar v2.93 multiple start on soft reset
- uninstalling XCPU
- MDA Vario / O2 XDA mini S / Qtek 9100
- Power off leaves phone buttons illimuninated
- Strangeness
- XCPUScalar closing on its own?
- Frequency on stanby mode
- scale rate
- XCPUScalar crash when closing camera
- Auto scale setting not preserved across soft resets.
- XCPUScalar and ASUS MyPal A636
- Problems with XCPUscalar and Atom
- XCPUScalar v2.93 and Qtek 9000 and Storage Card benchmark
- Version 2.93 with PPC 6700 IE shut down repeatedly
- ASUS 636 Autoscale BUG
- XCPUscalar & PPC6700
- Works great! Just can't disable the screen when playing MP3s.
- A newbie question
- Lockups even under default settings?
- Auto Scale doesn't work
- Problem with XCPUScalar and AXIM x51v
- Auto Scale doesn't work on Mitac 168/Yakumo 300 GPS 2L
- XCPUScalar does not start on i730 with WM5
- L=32, M=2, N=1 ??
- PPC6700 and XCpuScalar - Instant Lock / Screen Goes White (only when running on battery)
- XCPU does not start on Orange M600
- Bluelime here again
- xcpuscalar 2.93 and JasJar
- Uninstall will not work
- XCPUScalar not working on Mio A701 (WM5)
- Uninstall and Install
- iPAQ 2495b
- XCPUscalar 2006 now available for download
- PPC-6700: Battery Drain
- iPaq 6828 / 6818. Intel PXA272 - Not working
- XCPUScalar 2006 v2.96 is now available.
- XCPUScaler locking up I730
- Autoscale on hx4700 WM5
- CPU Speed hx4700
- O2 XDA IIi hangs with ver2.96
- Works great on Asus A636N
- XCPUScalar .. Samsung S3C2410 CPU not support?
- Optimum hx2750 Settings?
- screen flicking on a701
- CPU Meter & System Processes
- Keylock and Display toggle on A701
- Software hangs my HP 6915
- HTC TyTN and version 2.96
- XCPUScalar 2.96 and HP iPAQ hx4700 new ROM 2.01
- Unable to use 624Mhz on T-Mobile MDA Pro
- XCPUScaler and HTC6700
- XCPUScalar 2006 v2.97 is now available
- 2.97 not working HP 6828
- HTC TyTN and version 2.97
- XCPUScalar 2.97 is not working on O2 Atom!!!
- Problems running 2.97 on O2 Atom
- Ipaq 6515 (cingular) with new ROM image 1.20.31
- autoscale problems
- XCPUScalar 2006 v2.98 now available
- Maximizing Battery Life
- 2.98 and O2 Atom
- HTC TyTN and version 2.98 works!!
- 2.98 on Qtek 9000 - "screen waves" ??
- Speed on the Mio A701
- Dopod 900 hang when use with xcpuscalar from Ver 2.93 to 2.98
- Software hangs my I-teq BOND
- automatic scaling
- CPU speed defaults to standard when docked
- XCPU Scalar for iPaq 6965???